HOME > Press Release > 2012/04/20
Press Release
Press Release

Press Release

Press Release

New product release: MDX-X10

2012/04/20

New product release: MDX-X10

Ergonomically designed housing for the FUJIFILM X10 premium compact digital camera.

U/W Housing for Fuji X10
MDX-X10 housing(Black)(Housing only)
06160

【Features】
●Designed to be compact and lightweight
The MDX-X10 is an ergonomically designed and precision machined underwater housing made from solid block aluminum alloy.The housing is compact and has a small internal volume reducing excess buoyancy.

●Unrivaled ergonomics and performance
Smooth and easy adjustment of the zoom lens and camera power switch by an exclusively designed power/zoom control.The rear multi-point controller allows for subtle and fast control of the camera’s sub and main command dials.  The playback button, AE/Enlarge button and WB button are each situated for ease of operation.

●Two Fiber-optic cable sockets
By inserting the Fiber-optic Cable L-type into the housing connector, an external strobe will be optically connected to the camera’s built-in flash enabling full-featured strobe photography and creative lighting expression.

●The housing port is a M67 mount. The M67 Wide-conversion Lens can be mounted on the port or the Close-up Lens 125 can be attached to the port with the M67⇒M62 Step-down ring.
* The camera’s zoom is limited to 85mm with exclusively designed rubber gear due to the structure of the port.
With the Screw mount for SA8 M10 Fixed Ball Base, various lighting options are possible.
The housing can be easily opened and locked with the rotary latches and hinges.
While mounted inside the housing, the camera flash can be activated or disabled with the flash control button and disablement lever.
●Anti-slip rubber areas are located in the upper right and left corners of the rear case. These areas hold the housing securely to ensure proper alignment.
●Rugged construction with depth rating of 100m/330ft
●The Sea Arm 8 or the Sea Arm 7 can be mounted utilizing screw mounts on the bottom of the housing.  Up to two external strobes can be fixed.

【Specifications】
Construction:Corrosion-resistant aluminum alloy, galvanized (black)
Depth rating:100m / 330ft
Dimensions (WxHxD):165x105x125mm / 6.6x4.2x5.0 inches (including the port)
Weight:Approx. 1,100g / 38.8oz (housing alone)
Underwater weight:Approx. 360g / 9.4oz (including the camera)
Compatible strobes:YS-D1 as of April 2012