HOME > Line up > Compact Digital Camera Housings > Conversion Lenses and Accessories

Compact Digital Camera Housings

Compact Digital Camera Housings

Compact Digital Camera Housings

Conversion Lenses and Accessories

M67 Wide-angle Conversion Lens 0.6x
(Product No.52123)
A wide-angle conversion lens with M67 screw mount.
When the lens is mounted, the angle of view increases from 28mm to about a maximum of 17mm (35mm film camera equivalent). The lens can be detached and attached underwater; it can also be used on land.
· Use of an external strobe is strongly recommended; using the built-in flash when the lens is mounted may cause shadows to appear in images.
·The lens is compatible with the MDX-RX100III,MDX-RX100/II, MDX-X10* ,the Nikon WP-N1+ / WP-N2*/ WP-N3, the Olympus PT-EP06L, PT-EP05L as of September 2014.
* For starred (*) housings, slightly zoom to telephoto side to avoid vignetting.

[Lens] 3 elements in 3 groups
[Underwater angle of view] 94 degrees (150 degrees on land)
[Magnification] 0.6x
[Depth rating] 60m/200ft
[Weight] 426g / 15oz (220g / 7.8oz underwater)
[Dimensions (DIA x D)] 96 x 44mm /  3.8 x 1.7 inches
[Construction] corrosion-resistant aluminum alloy, anodized body (black).

*Enlarged image

M67 Wide-angle Conversion Lens 0.6x

Lens Caddy for M67 Wide-angle Conversion Lens
(Product No.60105)
The caddy is made of aluminum alloy and enables accessory lenses with M67 screw mounts to be attached to a SA8 Double Ball Arm (S/M/L) and stored when not in use. 
The caddy is securely bolted in place ensuring there is no movement or slip. Either the M67 Wide-angle Conversion Lens 0.6x or the Close-Up Lens 125 (with M67-M62 Step Down Ring) can be mounted.
Two accessory lenses with M67 mounts can be attached to a SA8 Double Ball Arm if you have two Lens Caddies fitted (one on each side).

Dimensions (DIA x D when attached to a SA8 Double Ball Arm): 72 x 25.1mm/2.8 x 1.0inches
Weight: 91g/3.2oz
Construction: Corrosion-resistant aluminum alloy, POM resin and stainless steel.


*Enlarged image

SA8 Double Ball Arm M with two M67 Lens Caddies attached.

SA8 Double Ball Arm M with one M67 Lens Caddy and M67 Wide-angle Conversion Lens mounted.

SA8 Double Ball Arm M with two M67 Lens Caddies, M67 Wide-angle Conversion Lens and Close-up Lens 125 (with M67-M62 Step Down Ring) mounted.

Lens Caddy for M67 Wide-angle Conversion Lens

Close-up Lens Ring for DX-GE5
(Product No.58124)
A set-up ring to attach the Close-UP Lens 125 to the DX-GE5 housing.
Minimum shooting distance on the telephoto side (underwater) :15 cm.
*Minimum shooting distance on the telephoto side (underwater ) without the close-up lens : 80 cm.

*Enlarged image

Close-up Lens Ring for DX-GE5

M52-M62 Step Up Ring
(Product No.58123)
The ring's diameter on the camera/housing side is 52mm and the diameter on the lens side is 62mm. The Close-UP Lens 125 can be mounted with the ring.
*When the Close-UP Lens 125 is mounted, the depth of field will be narrowed.                                                                                                                                                                                                                                     *If the camera's built-in flash is used when the lens is mounted, vignetting will occur.

*Enlarged image
*System sample
[ Specifications ]
[Dimensions (DIAxD)] 64x6.5mm / 2.6x0.3inch
[Weight] Approx. 5.3g / 0.2oz
[Construction] Corrosion-resistant alminum alloy

M52-M62 Step Up Ring

M52 Wide-Angle Conversion Lens
(Product No.52120)
Wide-Angle Conversion Lens for Olympus waterproof cases with M52 screw mount.

*The camera’s angle of view increases from 28mm to 18mm (35mm film equivalent). (The lens can be used both on land and underwater. Can be attached and detached underwater).
*The lens is compatible with Olympus PT-045 /  PT-047 /  PT-048 /  PT-051 /  PT-52 / PT-053 /  PT-055 waterproof cases as of September2014

*Enlarged image
*System sample
Click here for sample images  (all images were taken with a production sample)
[ Specifications ]
[Lens] 3 elements in 3 groups
[Underwater angle of view] 85° (106.5°on land)
[Magnification] 0.65x
[Depth rating] 60m / 200ft
[Weight] Approx. 400g / 14oz (underwater: Approx. 230g / 8.1oz)
[Dimensions (DIAxD)] 97x47mm / 3.9x1.9inch
*When used on land, slight vignetting (dimming) may occur in the four corners of the image. Slightly zoom in to telephoto to eliminate vignetting.
*A shadow may appear in the image if the built-in flash is used when the wide-angle conversion lens is mounted. It is highly recommended that you use an external strobe.

M52 Wide-Angle Conversion Lens

Wide-Angle Conversion Lens for DX-1G
(Product No.52116)
When the wide-angle conversion lens is mounted, the angle of view increases from 24mm to about 16mm (35mm film equivalent). (The lens can be used on land as well as underwater.)

*Enlarged image
Click here for sample 1
Click here for sample 2
[ Specifications ]
[Lens] 3 elements in 3 groups
[Underwater angle of view] 85° (106.5° on land)
[Magnification] 0.65x
[Depth rating] 60m / 200ft
[Weight] Approx. 406g / 14.2oz (underwater: Approx. 230g / 8.1oz)
[Dimensions (DIAxD)] 97x48.5mm / 3.9x1.9 inch
*The lens can be used on land, but slight vignetting (dimming) may occur in the four corners of the image. Slightly zoom in to telephoto to eliminate vignetting.
*A shadow may appear in the image if the built-in flash is used when the wide-angle conversion lens is mounted. It is highly recommended that you use an external strobe.

Wide-Angle Conversion Lens for DX-1G

Close-UP Lens 125
(Product No.52119)
By attaching the lens to the housing with the M62 mount or a macro port, macro photography beyond the camera’s or the lens’s original performance will become possible. Using the M67-M62 Step Down Ring, the lens can be mounted on the DX Macro Port 50 II. With the M52-M62 Step Up Ring, the lens can be mounted on Olympus’s various waterproof cases.

*Enlarged image
[ Specifications ]
[Lens construction] 2 elements in 2 groups (multi-coated)
[Focal length] 125mm (equivalent to close-up lens No.8)
[Dimensions (DIAxD)] 74x9.5mm / 3x0.4inch
*Compatible Olympus waterproof cases: PT-045、PT-047、PT-048、PT-051、PT-053、PT-055 (as of Aug 2013).
*In order to mount the lens onto the DX-1G, the DX-2G or the DX-1200HD, a close-up ring will be required. (More than two lenses can be mounted.)
*When the lens is used, move the zoom lens to the tele position.
*When the lens is mounted, the depth of field will be narrowed.

Close-UP Lens 125

Close-UP Lens Ring
(Product No.58119)
A set-up ring to attach the Close-UP Lens 125 to the DX-2G / DX-1G housings.

Close-UP Lens Ring

Close-UP Lens Ring for DX-1200HD
(Product No.58121)
A set-up ring to attach the Close-UP Lens 125 to the DX-1200HD housing.

Close-UP Lens Ring for DX-1200HD

Wide-Angle Conversion Lens for DX-860G
(Product No.52115)
This wide-angle conversion lens covers a maximum field angle equivalent to approx. 28mm (35mm film camera equivalent) when used with the DX-GE5 underwater.
This wide-angle conversion lens covers a maximum field angle equivalent to approx. 19.3mm (35mm film camera equivalent) when used with the DX-1200HD.
*When the lens is used out of water the camera may not focus on the subject depending on the distance to the subject. *When the lens is mounted on the camera on land, the camera may not focus on subject depending on distance to the subject. Slight vignetting (dimming) may occur in the four corners of the image. Zoom in to telephoto to eliminate vignetting. *When the wide-angle conversion lens is attached, its shadow can appear on the picture if the built-in flash is used. Using an external strobe together with the built-in flash is recommended.

*Enlarged image
[ Specifications ]
[Lens] 3 elements in 3 groups
[Underwater angle of view] 68°
[Magnification] 0.55x
[Depth rating] 45m / 150ft
[Weight] Approx. 165g / 5.8oz
[Dimensions (DIAxD)] 64x42mm / 2.6x1.7inch

Wide-Angle Conversion Lens for DX-860G

Lens Caddy for DX-1G
(Product No.60104)
The caddy enables the wide-angle conversion lens for the DX-1G to be attached to either the Sea Arm Light or Sea Arm VII Set.

Lens Caddy for DX-1G