Product Information
Digital SLR Camera Housings
Digital SLR Camera Housings [MDX-series]
Use Nikon’s flagship D3 freely even underwater. An exceptional item
that is sure to become the standard for pro digital SLR housings.
that is sure to become the standard for pro digital SLR housings.
U/W Housing for Nikon D3 / D3X
MDX-PRO D3
MDX-PRO D3 Housing (Black) (Housing only)
(Product No.06136)
(Product No.06136)
[Accessories] Housing body cap, hex wrench, CR2032 lithium battery, attachment tool
O-ring Set
(Product No.62136)
(Product No.62136)
Relevant Information
Replacement of the strobe sync connector (5-pin wired → 2-pin wired)
Consult a SEA&SEA authorized service center for more compatibility information.
Customizing the housing offers additional functions. You can replace the 5-pin wired YS converter connector on the top of the housing with a 2-pin wired strobe connector for an additional cost. This modification provides two 2-pin wired strobe connectors so you can connect two SEA&SEA YS-Series strobes.
*This modification does not support automatic TTL flash adjustment.
*It requires the 5-pin Sync Cord/N.
Consult a SEA&SEA authorized service center for more compatibility information.
Customizing the housing offers additional functions. You can replace the 5-pin wired YS converter connector on the top of the housing with a 2-pin wired strobe connector for an additional cost. This modification provides two 2-pin wired strobe connectors so you can connect two SEA&SEA YS-Series strobes.
*This modification does not support automatic TTL flash adjustment.
*It requires the 5-pin Sync Cord/N.
Features
*The image shows the rear case
Uses a lightweight and durable aluminum body that can withstand even the most severe shooting environments
The aluminum material used in the MDX series housings realizes a body that is both lightweight and strong. Because we envisioned photographers’ harsh usage environments, the body was successfully brought to an even higher level of perfection through the implementation of anodized aluminum processing. The all-new high-rigidity, high-durability, high-precision MDX series demonstrates the highest levels of performance under a variety of shooting conditions.
Manual adjustment is possible without releasing the grips
Designed for easy operation so you can comfortably reach the main command dial and sub-command dial with your fingers, while keeping your hands on the grips. Delicate operations are possible even while you are looking through the viewfinder. The larger diameter of frequently-used dials allows you to change the shutter speed or aperture value with a light touch while supporting the framing. This frees you, the photographer, to concentrate only on the perfect chance for a great picture.
TTL converter connector employed as standard
The included type-N 5-pin wired connector accepts the optional YS Converter/N. The converter works with the YS-Series strobes to provide automatic TTL flash adjustment.
*The converter requires the 5-pin Sync Cord/N for connecting to a strobe.
*The MDX-PRO D3 housing comes from the factory with these type-N connectors: one 2-pin wired connector and one 5-pin wired connector.
*To use two SEA&SEA YS-Series strobes with the factory-equipped type-N connectors, you must use the 5-pin Dual Sync Cord/N.
*The converter requires the 5-pin Sync Cord/N for connecting to a strobe.
*The MDX-PRO D3 housing comes from the factory with these type-N connectors: one 2-pin wired connector and one 5-pin wired connector.
*To use two SEA&SEA YS-Series strobes with the factory-equipped type-N connectors, you must use the 5-pin Dual Sync Cord/N.
- Every detail of the housing is precision machined from a solid aluminum block to achieve a high-quality texture and design. All edges have been polished carefully for safety.
- Manufactured from solid block aluminum alloy with all edges carefully polished for safety.
- The housing is protected by a highly corrosion resistant anodized (black) coating. The coating protects the housing from environmental corrosion and abrasions.
- Comes standard with two kinds of type-N connectors: one 2-pin wired connector (for manual) and one 5-pin wired connector (for dedicated TTL).
- Equipped with a Optical Viewfinder 0.66x standard. Interchangeable 0.5x/0.8x viewfinders (optional) are also available.
- A port lock mechanism secures the port from accidental loosening.
- A built-in leak sensor immediately alerts you to any water leakage.
- Strong and durable build, with a depth rating of up to 60m / 200ft.
Specifications
[ MDX-PRO D3 Housing ]
[Construction]Body: corrosion-resistant aluminum alloy (machined)
Grip: corrosion-resistant die-cast aluminum alloy
[Depth rating]60m / 200ft
[Dimensions (WxHxD)]355x220x151mm / 14.2x8.8x6inch
[Weight]Approx. 3,150g / 110.3oz (Housing only)
Grip: corrosion-resistant die-cast aluminum alloy
[Depth rating]60m / 200ft
[Dimensions (WxHxD)]355x220x151mm / 14.2x8.8x6inch
[Weight]Approx. 3,150g / 110.3oz (Housing only)
Digital SLR Camera Housings [MDX-series]
