Product Information

Strobes

Strobes

Strobes
[ Discontinued Products ]
Further improves the accuracy of the DS-TTL’s excellent performance. This is a new type of strobe building and improving on the basic functionality of the YS-110.
U/W Strobe

YS-110α

YS-110α(Black)
(Product No.03111)

[Accessories] Fixing bolt, diffuser
*When the YS-110α strobe is used with a compact digital camera in a housing, use the Fiber-Optic Cable (L-type).

O-ring Set
(Product No.10580)
YS-110α
   Enlarged image

Relevant Information

Notice
*YS-110α strobe has been minor-upgraded from ones built in September 2010. The upgraded YS-110α is called YS-110α Ver. 1.1.
*Marking of Ver.1.1 is found on the side of the main body below the serial number.
*YS-110α has become compatible with the G5WP-SS camera

*The Fiber-Optic Cable and the Strobe Mask Set are required when using the SEA&SEA strobe with a waterproof case made by another company.

Features

Ultimate creative effects with subtle light balance
The YS-110α introduces numerous new exciting functions, opening a whole new digital generation. For example, by connecting it to digital cameras with pre-flash function using a fiber-optic cable, the YS-110α can be used in the fully automatic DS-TTL adjustment mode (Digital Slave TTL). Enjoy complete creative control – when you want absolute control over fine light adjustments, you can use a main strobe in DS-TTL mode and a secondary strobe in manual mode or you can set up an advanced lighting system using two strobes in DS-TTL mode. The DS-TTL adjustment function is also available using the light level control dial for fine control of the light amount when taking pictures in DS-TTL mode. You can also choose from 13 levels of manual controls when you do not want to leave the light adjustment up to the camera. The flat, round, 105° beam angle (with diffuser), achieved by the balanced positioning of the 3 flash tubes, and the power of a Guide Number 22 are examples of the excellent performance of the strobe that is sure to satisfy even the most demanding professionals.

Specifications

[ YS-110α ]
[Guide Number (ISO 100/m) (land)] 22
[Beam Angle] 105°x 105° (with diffuser)
[Batteries] 4xAA A: 6V Ni-MH: 4.8V
[Number of Flashes*1] A: 230 Ni-MH: 330
[Recycle time (full)*2] A: 2.5 sec. Ni-MH: 1.9 sec.
[Color temperature] 5400K
[Color temperature w/diffuser] 5100K
[Depth rating] 60m / 200ft
[Dimensions (WxHxD)] 88x115x150mm / 3.5x4.6x6inch
[Weight] 700g / 24.5oz
[Underwater weight] -10g / -0.4oz
[Others]
- Exposure control: DS-TTL, TTL, Light level control dial (GN): 1.4 / 2 / 2.5 / 2.8 / 3.5 / 4 / 4.5 / 5.6 / 6.7 / 8 / 11 / 16 / 22 (13 steps)
- Pre-flash control: Equipped with pre-flash cancel mode
- DS-TTL function
- Slave function
- Auto power OFF function
- Sync cord: 5-pin Sync cord/N17100, Fiber-Optic Cable (L-type)
- Over-pressure relief valve
- LED target light

*1 Number of flashes and recycle time depends on the battery brand, temperature and frequency of use. *2 Number of flashes and recycle time of Ni-MH batteries were tested on 2700mAh batteries.

Brochure & Manual Download