YS-01 SOLIS | Strobes | SEA&SEA

The YS-01, the best-selling strobe in its class has been redesigned, boasting improved performance.
U/W Strobe
YS-01 SOLIS
YS-01 SOLIS (Black)
Product No.03124
Features
  • Equipped with the same DS-TTL ll circuitry as superior Sea&sea’s high-end models
    The DS-TTL ll circuitry helps emit the correct amount of light automatically based upon light intensity from the camera’s onboard flash. The strobe allows you to adjust light intensity stronger or weaker from programed standard exposure. With this function, even an inexperienced underwater photographer can instinctively control the desired amount of light.Example: If you are using two YS-01 Solis strobes, one on the right and the other on the left, and there is white soft coral to the right of your photographic subject, you can just delicately lessen light intensity from the strobe on the right alone by just turning the light level control to minus. With the improved circuitry, you can realize desired lighting for all your underwater images in a breeze.

    DS-TTLII correct to plus 4steps
  • Increased light intensity from the target light
    Compared with the predecessor model, lighting intensity of the YS-01 Solis’ target light is 40% stronger increasing the visibility of the light axis has improved helps you understand position of the strobe position more accurately.

    YS-01 SOLIS target light demonstration video (You Tube)
  • Superior light distribution and wide beam angle
    Because of exclusively designed prism lens, the YS-01 Solis realizes a wide beam angle of 100°x 100°with ideal flat light distribution even when the accessory diffuser is not attached. With the diffuser, light will soften and beam angle will increase to 110°x 110°

    Ideal flat and circular light distribution. One top light. TG5 + WCL06x
Specifications
YS-01 SOLIS
[Guide Number (ISO 100/m) (land)] 20
[Beam Angle] 100°x 100° (with diffuser 110°x110°)
[Batteries] 4xAA A: 6V Ni-MH: 4.8V
[Number of Flashes] A: 230 Ni-MH: 300
[Recycle time (full)] A: 2.5 sec. Ni-MH: 1.9 sec.
[Color temperature] 5600K
[Color temperature w/diffuser] 5250K
[Depth rating] 75m / 250ft
[Dimensions (WxHxD)] 75x111x129mm / 4x4.4x5.1inch
[Weight] : 441g / 14.7oz (w/o batteries) * Attached a fixing bolt to the Strobe.
[Underwater weight] : Approx.+60g / 0.35oz(w/ batteries)
[Others]
- Exposure control: DS-TTLII +4steps -5steps 
- Light level control dial (GN): 1 / 1.4 / 2 / 2.8 / 4 / 5.6 / 8 / 11 / 16 / 20 (10 steps)
- Pre-flash control: Equipped with pre-flash cancel mode
- DS-TTLII function
- Auto power OFF function
- Sync cord: Fiber-Optic Cable
- Over-pressure relief valve
- LED target light
Brochure & Manual Download
YS-01 SOLIS Download
Instruction Manual for YS-01 SOLIS manual_M5rM.pdf(5.12MB)
Related Items
  • Set Items
    Fixing bolt, diffuser
     
     
     
    CAUTION
    * Use of genuine SEA&SEA Fiber-Optic Cables is recommended. SEA&SEA strobes may not function properly if a third-party Fiber-Optic Cables are used (functions such as TTL auto exposure in particular).
     
    *Do not use non-recommended batteries (such as lithium primary batteries). Use of non-recommended batteries may cause battery leakage and overheating and may cause the strobe to rupture, which could result in personal injury.
Recommended Products!
  • YS-D3 LIGHTNING
  • YS-03 SOLIS
  • YS-03 SOLIS UNIVERSAL LIGHTING SYSTEM
Zoom in with double tapping.