OTHER ACCESSORY
Strobe Connector/N
An extension connector for attaching a strobe connector to the housing.
- Product No.
- 50147
Specifications
- Compatible Model
- MDX Housing Series
OTHER ACCESSORY
An extension connector for attaching a strobe connector to the housing.
OTHER ACCESSORY
By attaching it to the housing's expansion connector, you can use M16-compatible accessories, such as third-party external monitors.
OTHER ACCESSORY
This is the light-blocking ring required when using the SEL1635Z in combination with a dome port. It reduces ghosting caused by light hitting the front of the lens and reflecting inside the port.
OTHER ACCESSORY
This is the light-blocking ring required when using the SEL1018 in combination with the ML Dome Port. It reduces ghosting caused by light hitting the front of the lens and reflecting inside the port, and also minimizes flare from the built-in flash. Furthermore, using the SEL1018 zoom gear in conjunction with this ring will prevent flare from the built-in flash.
OTHER ACCESSORY
This is the light-blocking ring required when using the SEL16F28 in combination with the ML Dome Port. It reduces ghosting caused by light hitting the front of the lens and reflecting inside the port, and also minimizes flare from the built-in flash. Furthermore, using the SEL16F28 light-blocking pad in conjunction with this ring will prevent flare from the built-in flash.
OTHER ACCESSORY
Corrosion inhibitor for the housing. Please replace it once it has shrunk to a certain extent.
OTHER ACCESSORY
A set of 2-pin strobe and sync connectors that users can install and replace themselves. They can be installed after removing the expansion connector cap from the top of the housing.
※This is required to connect a YS series strobe to our digital SLR housings—which come standard with a machined lid (expansion connector cap)—using a sync cable.
Explanation of how to install the connector set (synchro cord 2-pin connector set)
Copyright (C) SEA&SEA Co., Ltd. All Rights Reserved.