Compatible with both the VF180 and VF45 1.2x viewfinders
By attachment of a 45° viewfinder (view magnification of 1.2x) with Amici prisms to the By attaching the VF180 1.2x or the VF45 1.2x prism viewfinder (magnification ratio of 1.2x) to a SEA&SEA housing, the magnification increases by 1.2x and entire field of view can be seen at the same time. Recommended for users committed to strict composition and focusing.
* Factory modification is required to install the viewfinder. Contact an official SEA&SEA dealer or distributor.
Manual adjustment is possible without releasing the grips
Designed for easy operation so you can comfortably reach the main dial and quick control dial with your fingers, while keeping your hands on the grips. Delicate operations are possible even while you are looking through the viewfinder. The larger diameter of frequently-used dials allows you to change the shutter speed or aperture value with a light touch while supporting the framing. This frees you, the photographer, to concentrate only on the perfect chance for a great picture.
TTL converter connector employed as standard
The included 6-pin wired connector accepts the optional YS Converter/C. The converter works with the YS-Series strobes to provide automatic TTL flash adjustment.
*The converter requires the Sync Cord/N for connecting to a strobe.
*The MDX-40D housing comes from the factory with these bulkhead connectors: one type-N (2-pin wired) connector and one 6-pin (6-pin wired) connector.
*To use two SEA&SEA YS-Series strobes with the factory-equipped bulkhead connectors, you must use the 5-pin Dual Sync Cord/N.
Replacement of the strobe sync connector (6-pin wired 2-pin wired)
Consult a SEA&SEA authorized service center for more compatibility information.
Customizing the housing offers additional functions. You can replace the 6-pin wired TTL converter connector on the top of the housing with a 2-pin wired strobe connector for an additional cost. This modification provides two 2-pin wired strobe connectors so you can connect two SEA&SEA YS-Series strobes.
*This modification does not support automatic TTL flash adjustment.
*It requires the 5-pin Sync Cord/N.