The Optical YS Converter can be installed in the housing
Compatible with new Optical YS Converter/S1 for MDX housing which converts the camera’s TTL signal to a light signal. Both TTL and manual strobe photography is possible using a Fiber-Optic Cable II.
* This converter requires special installation. Please contact your local SEA&SEA service center for further details.
* Fiber-Optic Cable ll is required when using the Optical YS Converter.
* SONY's own shoe adapter "ADP-MAA" is required to connect the camera and the Optical YS Converter.
Compatible with both the VF180 1.2x and VF45 1.2x viewfinders
Using the VF180 or VF45 viewfinders increases magnification by 1.2x and provides a full field of view. The VF180 and VF45 are recommended for users dedicated to strict composition and focusing.
* Some vignetting occurs.
The camera's diopter-adjustment dial can be operated from the housing. This feature is effective when two or more people (with different eyesight) use the housing.
Compatible with FE series lenses designed for full-frame sensor cameras
In addition to various E-mount lenses, the camera and housing are compatible with FE series lenses for full-frame image sensor cameras via the ML-NX Conversion Ring 30.
SEL1635Z Vario-Tessar T* FE16-35mm F4 ZA OSS
Scheduled to be compatible with:
SEL55F18Z Sonnar T* FE 55mm F1.8 ZA
SEL2870 FE 28-70mm F3.5-5.6 OSS
FE28mm F2 + FE Ultra-Wide Converter
FE28mm F2 + FE Fisheye Converter
SEL35F14Z Distagon T* FE 35mm F1.4 ZA
FE90mm F2.8 Macro G OSS
Major controls, including levers and buttons, will glow in dark conditions.
Equipped with movable Focus/Zoom gear
When the focus/zoom dial is pulled out, the gear inside the housing moves outward and allows large diameter lenses to be easily mounted.
Main dials are equipped with damper springs
The front dial, rear dial, diopter-adjustment dial and AF/MF/AEL switch lever all have spring-loaded dampers to provide secure operation.
|The housing is not equipped with a strobe connector when shipped from the factory. Use (a) Fiber-optic Cable(s) when connecting external strobe(s). Optional Sync Cord 2-pin Connector is required if you wish to use a conventional hardwired Sync cable.