Uses a lightweight and durable aluminum body that can withstand even the most severe shooting environments
The aluminum material used in the MDX series housings realizes a body that is both lightweight and strong. Because we envisioned photographers’ harsh usage environments, the body was successfully brought to an even higher level of perfection through the implementation of anodized aluminum processing. The all-new high-rigidity, high-durability, high-precision MDX series demonstrates the highest levels of performance under a variety of shooting conditions.
Manual adjustment is possible without releasing the grips
Designed for easy operation so you can comfortably reach the main dial and quick control dial with your fingers, while keeping your hands on the grips. Delicate operations are possible even while you are looking through the viewfinder. The larger diameter of frequently-used dials allows you to change the shutter speed or aperture value with a light touch while supporting the framing. This frees you, the photographer, to concentrate only on the perfect chance for a great picture.
TTL converter connector employed as standard
The included 6-pin wired connector accepts the optional YS Converter/C. The converter works with the YS-Series strobes to provide automatic TTL flash adjustment.
*The converter requires the 5-pin Sync Cord/N for connecting to a strobe.
*The MDX-PRO Mark? housing comes from the factory with these bulkhead connectors: one type-N (2-pin wired) connector and one 6-pin (6-pin wired) connector.
*To use two SEA&SEA YS-Series strobes with the factory-equipped bulkhead connectors, you must use the 5-pin Dual Sync Cord/N.
Replacement of the strobe sync connector (6-pin wired 2-pin wired)
Consult a SEA&SEA authorized service center for more compatibility information.
Customizing the housing offers additional functions. You can replace the 6-pin wired TTL converter connector on the top of the housing with a 2-pin wired strobe connector for an additional cost. This modification provides two 2-pin wired strobe connectors so you can connect two SEA&SEA YS-Series strobes.
*This modification does not support automatic TTL flash adjustment.
*It requires the 5-pin Sync Cord/N.