YS-D130R Dedicated Snoot.
By converting the strobe light into a spot, it cuts off the light hitting the subject's surroundings, creating an effect that makes only the subject stand out.

YS-D130R Dedicated Diffuser.
Expands the beam angle to 102° × 102° for softer lighting.

YS-D130R Dedicated Strobe Cover.
Made from highly stretchable neoprene material to protect your equipment.

Lithium-ion rechargeable battery for the YS-D130R.

USB Charger for YS-D130R Rechargeable Battery ‘SB-L02’.
Supports charging two batteries simultaneously.

*AC charger not included.

A strobe adaptor which narrows the beam angle to be directed at a target point. Diameter of the opening 25mm. Designed with internal prism which aligns target light`s light axis and strobe`s light axis to the center.
Compatible with YS-D3 series.



By using a snoot, the light surrounding the subject is cut off and only the subject is brought into view.

Increases beam angle to 150°×170°. Essential accessory when fisheye lens is used, or soft light is required.
+ Guide number will drop to -1.5EV when it is fitted.

Optical guiding device to fire the strobe when a fiber-optic cable is not used. This device is for manual use only. The device is effective if multiple strobes are used in a fixed position. However, the flash may not fire depending on the position of where multiple flashes are occurring in relation to that of the master flash.

A ball base inclined at 35 ° compared to the straight type. This makes it easier to lower the strobe backwards, making it suitable for shooting when using a dome port. Also, when a Synchro Cord N is installed, interference between the cord and the ball clamp is minimized.
Compatible with YS-D3 series.

Traditional YS base. Easy vertical swing.

Compatible with YS-D3 series.

Guide number 24, 100° beam angle.

Guide number 20, 120° beam angle.

Stick the Velcro tape to the underwater housing covering the camera’s built-in flash. Connect the Fiber-Optic Cable.
*The Velcro tape to be cut off in accordance with the shape of the housing.
*Compatibility depends on the model of the housing.

The surface is made of a fine mesh skin with a fine mesh finish.
Neoprene strobe cover on the back.
Compatible with YS-D3 series.
*To attach or detach the cover, remove the strobe ball base.