MDX-R5

For better noticeability, controls are partially colored with yellow.

All major controls for camera function can be easily operated without releasing your grip on the handle, providing stability and assurance during all imaging situations

Compatible with the Sea&Sea, “Manual Flash Trigger” (optional). and Sea&Sea Optical TTL Coverter.

Leak Alarm Unit as standard equipment

The Leak Alarm Unit, which was previously available as an option, is now included as standard equipment.
It is effective not only for early detection of underwater flooding accidents, but also for protection of equipment by checking its waterproof performance before entry.
CR2032 lithium battery included.

24mm bulkhead allows connection of 3rd party HDMI 2 cable for attaching an external video monitor

The Port lock prevents the port from turning or loosening and the Port Lock lever is specifically located to avoid being unlocked accidentally.
The housing is equipped with a lens-lock release button which makes it possible to change lenses easily,sithout opening the housing.
Pulling out the Focus/Zoom Dial gives sufficient room inside the housing to easily accommodate larger diameter lenses.
All controls have luminescense stickers which glow in a dark enbironment for better visibility of controls.
Equipped with Optical Viewfinder 0.5x as standard. Other optional viewfinders such as the VF180 1.2x,VF45 1.2x and Optical Viewfinder 0.66x,0.8x can be used.
※Some vignetting may occur when the VF180 1.2x is mounted on housing, the upper part of the camera's viewfinder cannot be viewed dus to vignetting.
Sync Cord 2-pin Connector enables use of conventional hardwired Sync cable(Manual mode only).
Equipped with two sacrificial zinc diodes (one on the fornt case and the other on the rear) to prevent electrolysis damege.
Built-in leak sensor immediately alerts alerts you to water ingress.
Tripod screw mount is located on the center underside of the housing.
Equipped with an under guard to protect housing from scratches and abrasion

Dimensions : (W x H x D) 345 x 173 x 164 mm 13.5 x 6.8 x 6.4 Inches
Weight, Approx. : 2900 gm / 102.3 Oz (Including Grips).
Depth Eating : 100M / 330 ft
Construction : Corrosion resistant aluminum alloy (machined. Anodized finish)
System Chart